Department Division: Machines, Propulsion, Energy Systems
- Research Group: LEAP/EPS
Development of advanced tools for the optimization of Smarty Energy Systems
Supervisor: Filippo Bovera
- Research Group: Propulsion
Study of partial pre-mixing on combustion and on the emission of GN / H2 / AIR flames stabilized by swirl
Responsible: Fabio Cozzi
Studio del campo di moto all'interno di cavità risonanti per acceleratori lineari9 mediante tecnica Stereo-PIV
Responsible: Fabio Cozzi
Analisi della combustione dell'idrogeno in bruciatori di piccola taglia
Responsible: Fabio Cozzi
Department Division: Machines, Propulsion, Energy Systems
- Research Group: Energy Conversion Systems (GECOS)
Modelling of Hg adsorption on activated carbon in the fabric filter of a WtE plant
Supervisor: Manuele Gatti
Modelling approaches based on Computational Fluid Dynamics (CFD) for biomass combustion systems
Supervisor: Federico Viganò
Experimental testing of hydrogen and methane flow meters
Supervisor: Gianluca Valenti
Assessment of pipeline grids for the delivery of natural gas/SNG/biomethane/hydrogen blends
Supervisor: Paolo Colbertaldo
Modello 1D per la valutazione delle prestazioni di compressori assiali
Responsible: Paolo Chiesa - Emanuele Martelli
Separazione di miscele gas naturale / idrogeno mediante sistemi a membrana
Responsabile (responsible): Paolo Chiesa
Innovative refrigerant mixtures for heat pump applications: thermodynamic properties modelling, Vapor-Liquid-Equilibrium measurements, and performance evaluation
Responsible: Stefano Consonni - Daniele Di Bona - Chiara Stocchetti
Modelling and Techno-Economic Assessment of CO2 from NGCC flue gas via chemical absorption with green solvents
Responsible: Manuele Gatti - Antonio Conversano
Modelling, integration and optimisation of an innovative process for the production and use of green hydrogen in steelmaking solvents
Responsabili: Manuele Gatti - Maurizio Spinelli - Roberto Scaccabarozzi
Numerical modeling and simulation of a dual screw compressor
Responsible: Antonio Giuffrida
A Mean-line model to predict the performance of radial inflow turbines
Responsible: Antonio Giuffrida
CFD modelling of a high flux solar receiver using liquid sodium
Responsible: Luca Marocco - Andrea Giostri - Marco Binotti
Ottimizzazione di Multi Energy Systems e Virtual power Plants
Responsible: Emanuele Martelli
Optimization of CO2 capture processes with amines
Responsible: Emanuele Martelli
Ottimizzazione di cicli ibridi turbogas-fuel cell
Responsible: Emanuele Martelli
Ottimizzazione microreti con requisiti di affidabilità
Responsible: Emanuele Martelli
Ottimizzazione di cicli combinati con cattura CO2
Responsible: Emanuele Martelli
Innovative algorithms for the preliminary design of conventional and non-conventional turbines
Responsible: Giacomo Persico - Emanuele Martelli - Alessandro Romei - Cristina Elsido
Techno-economic analysis of plants for the production of liquids and hydrogen from biomass gasification in flexibly operated plants
Responsible: Matteo Romano - Alessandro Poluzzi - Giulio Guandalini
Small-scale power generation via sliding vane expanders: extension of an existing code and validation against experimental data for steam applications
Responsible: Gianluca Valenti - Stefano Murgia
Development of a mid-size biomethane liquefier for road and sea transportation sectors
Supervisor: Gianluca Valenti